COMBINING THE POWER OF THE SWITCH-PROS MODULE WITH THE ORGANIZATION OF BLUE SEA SYSTEMS GIVES YOU EVERYTHING YOU NEED TO ORGANIZE AND MAINTAIN YOUR ELECTRICAL SYSTEM LIKE A PROFESSIONAL.
Take all the guess work out of wiring up a new accessory. The Switch-Pros PowerTray employs a dedicated 8 circuit barrier terminal block and low profile grounding busbar, which creates the ultimate wire management solution for your Switch-Pros. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We’ve been there and done that and learned from our frustration.
Now with the Switch-Pros PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive to one of the 8 circuits on the barrier terminal block and the negative to your common ground busbar. That’s it, you’re done! No need to bust out a soldering iron or buy fancy connectors that require expensive specialty crimpers.
The Switch-Pros PowerTray also features the Blue Sea 6 circuit fuse block, which expands the system’s capacity by giving you the added ability to wire in accessories that would otherwise be inconvenient to power though your Switch-Pros. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on.
This addition fuse block is also great for accessories like front/rear mount cameras, aftermarket HID headlights, aftermarket Horns, air compressors etc. Accessories like this use the vehicles own factory wiring to activate the accessory, but due to the thin gauge of wire used for OEM applications most aftermarket parts like these need more robust power source to draw from.
This product is for the Switch-Pros PowerTray Mounting Platform, Support Leg, and mounting hardware.
It does not include the Switch-Pros, Blue Sea accessories, Power/Ground Cables, terminals/fuses etc. Click Here for those items.
FEATURES:
-
PEM® Fasteners with Stainless Steel Screws – Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.
- 1/8th Inch 5052 Aircraft Aluminum – Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.
- Waterjet manufacturing – Guarantees precise cuts with an accuracy of ±0.003″, which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.
- Chamfered edges – This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don’t have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.
- Perfect fit – Don’t sacrifice access to your factory fuse block with other mounts! Each PowerTray is designed around your factory components.
- Unparalleled stability – Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.
- High Quality JIS Class 10.9 Steel Hardware – Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.
- Power Made Easy – Delivered right to your door with step-by-step installation instructions.
THIS POWERTRAY WILL FIT THE FOLLOWING VEHICLES:
- Toyota FJ cruiser 07-14 with Automatic Transmission
- Unfortunately manual transmission FJ’s have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install.
- Note: FJ cruiser’s with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed.
- Toyota 5th gen 4Runner’s 09-Current
- Note: 2020+ 4runners have an additional relay/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this PowerTray. CLICK HERE to see the process.
- Toyota 4th gen 4Runner’s 02-09
- Note: 4th gen 4Runners have less hood clearance compared to newer models and this PowerTray will need spaced out 1/2 inch in order to clear the factory hood struts. CLICK HERE to purchase the spacer kit.
- Lexus GX470 02-09 and GX460 10-Current
- Note: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.
Fast Delivery and Professional Packaging
We are able offer many shipping options thanks to our long-term relationship with UPS FedEx DHL. Our warehouse staff are highly trained and will be able to pack your goods in accordance with the exact and precise specifications. Your items will undergo an extensive inspection and will be securely secured prior to being delivered. Everyday, we send to thousands of customers in different countries. This is an indication of our determination to become the biggest online retailer in the world. The warehouses are located in Europe as much as they are in USA.
Note: Orders with more than one item will be assigned a distinct processing period depending on the specific item.
Prior to shipping the items, our staff will carry out an exhaustive inspection of the items you purchased. The majority of orders will be sent within 48 hours. The delivery time should be between 3 and 7 working days.
Returns
The inventory is always changing, and not fully managed by us due to the involvement of several parties including the factory and our warehouse. The levels of stock can change at any moment. It's possible that your order will be unable to fill after you place the order.
The policy is 30 days. If 30 days have passed since you purchased your product, we are unable to provide a refund or exchange.
You can only return an item when it's unopened and still in the same state as the day you received it. It must also be in the original packaging.
Related products
Roof Rack
Sherpa Equipment Co – The Matterhorn MkII (3rd Gen 4Runner) Sherpa Equipment Co Factory Outlet
Brake Upgrade Kit
Powerbrake 5th Gen 4Runner D-Line Brake Upgrade Kit 2010+ PowerBrake Factory Outlet
Big Brake Kit
Powerbrake X-Line 4×4 Big Brake Stage-1 for Toyota 4Runner 2010+ PowerBrake Factory Outlet
Suspension Component
SPC Adjustable Upper Control Arms – 25470 (Toyota Tacoma 05 & Up) SPC Factory Outlet
Roof Rack
Front Runner Toyota 4Runner (5th Gen) ¾ Slimline II Roof Rack Kit Front Runner Factory Outlet
Suspension Component
First Aid Kit
First Aid Kit
Lighting Accessory
Vehicle Accessory Mount
Rago Fabrications CB Antenna Mount for 5th Gen 4Runner Rago Fabrications Factory Outlet
Packages
Brian’s Favorite Package for Toyota 4Runner 2010-Present 5th Gen. Goose Gear Factory Outlet
Baja Designs Accessory
Baja Designs Toyota, Tacoma(12-19)/4Runner(10-19)/Tundra(14-19) FPK Baja Designs Factory Outlet
First Aid Kit